The single side flat sticker labeling machine is utilized to label one side of the flat containers; or full and partial wrap around labels on various dimensions of other containers. This robust machine has a smooth stainless steel finish, which also includes the mainframe. It is the most user friendly equipment, with a capacity of labeling 30 to 40 units per minute; as per the size of the product and label. The speed also depends on the stable movement of the container on the machine conveyor at a higher speed.
This sophisticated and simple model has the latest belt spacing device that results in a no parts change system, even if the size of the containers and labels is changed. Moreover, the machine includes an advanced and distinct single point control system for online speed variation. Further, this versatile and precise equipment is reputed for its high label placement accuracy. It also incorporates an integrated A.C. frequency drive system. Besides this, the machine can use labels with a minimum length of 12 mm and a height that ranges from 8 mm to 70/90/120/150 mm. Usually the roll diameter is 300 mm and the core diameter is 75 mm.
Whereas the gap between the two labels is approximately 3 mm. Further, it has a built-in automatic label length detecting system that eliminates the system of manually feeding and storing the details of the label length into the memory and retrieving the same data when the label size is changed and the machine is restarted. This modern system saves overall cost, precious time, avoids machine down time, and enables to achieve higher productivity. This model is available with an optional sturdy glass or acrylic safety cabinet. Actually it fulfils all the basic needs of the typical machine required in the current market.
| Labelling Accuracy | ±1 mm |
| PLC | Programmable Logic Controller Unit – DELTA Make |
| Touch Screen | Delta Make Touch Screen |
| Stepper Motor | Sanyo denki stepper motor – Japan Make |
| Servo Motor | Panasonic / Delta Make |
| Microprocessor | Microprocessor Controller |
| Sensors ( Product / Label ) | Leuze – USA or Sick Germany Make |
| AC Drive ( Variable Speed) | Delta Make |
| All Electrical / Electronic Cables | Labb – Germany Make |
| Pneumatic Cylinders | SMC / Festo Make |
| Speed | Up to 30 to 40 Labels per minute depending on Product and Label Size. The speed is also depending on stable movement of Product on machine conveyor at higher speed |
| Label Height | 8 mm to 70/90/120/150 mm Standard* |
| Label Length | 12 mm Minimum |
| Label Roll Dia | 300 mm |
| Label Accuracy | ±1 mm |
| Core Dia | 75/76 mm |
| Gap Between Two Labels | Appx. 3 mm |
| Product Size | As Per Customers Requirements* |
| Electrical | 220 VAC Single Phase Power Supply (50/60 Hz) |
| Power | 2.0 Amp |
| Capacity | 0.75 Kw |
| Conveyor Height | 830-875 mm* |
| Overall Dimension | 1830 mm (L) x 910 mm (W) x 1400 mm (H) |
| Machine Direction of Movement | Left to Right From Operator Side |
| Machine Main Base Frame | Mild Steel or Stainless Steel 304 |
| Machine Coverings | Complete in Stainless Steel 304 |
| Product Contact Parts | Stainless Steel 304 |
| Non Contact Parts | Stainless Steel / Mild Steel / Aluminum / Teflon (Whichever is applicable) |
| Conveyor Belt | Rubber Belt (Stainless Steel – for heavy products) |
| Conveyor Shafts | Mild Steel with Hard Chrome or Zinc Plating |
| Conveyor Sprockets | Mild Steel or Nylon |
| Bearings | SKF / Niche / Equivalent |
| Plating(Wherever Applicable) | ENP / Zinc / Hard Chrome / Blackening |
| TOP Conveyor Belt | Timing Sponge Belt |
| Guide Rod & Pin | Stainless Steel 304 |
| Dispenser Rollers | Rubber Molded + Aluminum + Knurling Rollers |
| Dispenser Unit Up & Down | Screw Based UP & DOWN Assembly |
Plot No : 2802, Nr. Ramol Cross Roads,
G.I.D.C, Phase 4, Vatva, Opp. Winflex Ltd,
Ahmedabad - 382445, Gujarat, India.
